3 Easy Steps Cameo Silhouette Application For Heat Transfer Pu Vinyl
Step 1 - CUT 1 Select a design and lay it out at the Silhouette Studio software. Remember to MIRROR the image. 2 Feed the heat transfer sheet into the Silhouette Cameo Cutter with the glossy side down. 2.1 Select “LOAD CUTTING MAT” at the Silhouette Cameo Cutter if you feed the heat transfer sheet with a cutting mat. 2.2 Select “LOAD MEDIA” at the Silhouette Cameo Cutter if you feed the heat transfer sheet without a cutting mat. 3 Change the cutting setting as following: CUTTING APPLICATION: Number of Blade 3 ~ 4, Cutting Speed 8 ~ 10, Thickness Setting 8 ~ 10 Recommend to use “TEST CUT” function of your cutting plotter which cuts a small square with a triangle on your paper to ensure a clean cut for your design. Step 2 - PEEL 4. Peel off the unwanted parts, starting at the corner and leave only the design you want to transfer on the plastic transfer sheet. Step 3 - PRESS 5. Transferring By Hand Iron: Preheat iron to the cotton / linen setting for 5 minutes.